DTG30M954F
Dacor DTG30M954F Four-Burner Cooktop Repair
Most common issues on this model
- Igniters that keep clicking after the flame is lit
- A burner that goes out right after lighting at low heat
- Coating that dulls or marks from abrasive cleaners
- A flame that looks uneven on the 18,500 BTU burner
The Dacor DTG30M954F is a 30-inch gas cooktop from the Contemporary series. It has four sealed burners: one at 18,500 BTU, one at 13,000 BTU and two at 9,500 BTU. The surface has a diamond-like carbon coating, and the cooktop is available for natural gas and for LP.
Because this is a current model, the usual problems are not age-related wear. More often it is a burner that clicks continuously, a flame that goes out at low heat, or a surface that was cleaned with something too rough. We check the igniter, the cap seating and the gas version on the label first, then test how each burner behaves from high to low.
Soft cloths and non-abrasive cleaners are the safe way to care for the coated surface, since scratches in it cannot be repaired. Before ordering parts we read the full model and serial, and the quote is written ahead of the work. The 30-day workmanship warranty stays with the repair once the burners are working properly.
Key features
- 30-inch Contemporary gas cooktop with four sealed burners
- Burners of 18,500, 13,000 and two of 9,500 BTU
- Diamond-like carbon coated surface
- Natural gas and LP versions
Error codes this model can show
What are the burner sizes on the DTG30M954F?
The four sealed burners are 18,500 BTU, 13,000 BTU and two at 9,500 BTU. The largest suits fast boiling and searing, and the smaller ones handle simmering and gentle heat.
Why does my burner keep clicking after it has lit?
Continuous clicking often means the igniter is wet or dirty, or the cap is not seated and the flame is not reaching the igniter. We dry and clean it, check the seating, and test the spark path if it continues.
Can the coated surface be repaired if it gets marked?
No. A mark made by an abrasive cleaner is in the coating itself, so we cannot restore it. We can make sure the burners work correctly and explain how to clean the surface without making it worse.
Book repair for your DTG30M954F
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.