Booking today · Houston · three-hour arrival windows Independent Dacor specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 231-9708 Schedule a Technician
Error code · Cooktop & Rangetop

Dacor DOP30T940IS Range Cooktop Code FA: Right Inverter Link Lost

FA on the Dacor DOP30T940IS induction range cooktop means communication between the induction main board and the right inverter board has been interrupted. That inverter board powers the right-side burners, so they stop heating while the…

High · stop use, call now
Schedule a Technician(713) 231-9708
Code
FA
Appliance
Cooktop & Rangetop
Brand
Dacor
Warranty
30-day workmanship

What FA means

FA on the Dacor DOP30T940IS induction range cooktop means communication between the induction main board and the right inverter board has been interrupted. That inverter board powers the right-side burners, so they stop heating while the cooktop displays FA. It is the right-side counterpart of the F8 code. Burners on the left side may still work normally while the right side stays off.

Common causes of FA

  • Cable or connector to the right inverter board loose
  • Power disturbance upsetting the boards
  • The right inverter board
  • The induction main board
✓ One safe check you can try

1. Power the cooktop off and on. 2. If FA appears again, disconnect power at the circuit breaker for 30 seconds and restore it. 3. If it persists, leave the cooktop off and call for service. Please do not open the cooktop or handle its wiring yourself.

! Why to stop there
  • Whether the right inverter board, the main board or the link between them has failed
  • Whether a left-side code appears too, which would point at the main board
  • Parts and price, confirmed in writing before the repair
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop & Rangetop codes

C0Dacor Modernist Cooktop Code C0: Top Sensor Open C1Dacor Modernist Cooktop Code C1: Top Sensor Short C1 (range cooktop)Dacor DOP30T940IS Range Cooktop Code C1: Burner Running Too Hot C2Dacor Induction Cooktop Code C2: IGBT Sensor Problem d0Dacor Modernist Cooktop Code d0: Key Held Down E2Dacor Induction Cooktop Code E2: Element Overheated F0Dacor Modernist Cooktop Code F0: Control Boards Not Communicating F1Dacor Modernist Cooktop Code F1: Memory Chip Not Responding
FAFA questions
Why only the right burners?

The right inverter board powers the right-side burners. When the main board loses its link to it, only that side goes quiet and the cooktop shows FA, while the left burners keep working.

What if both F8 and FA appear?

Then both inverter links are down, and the shared main board becomes our first suspect. We test it and its connections before replacing either inverter board, so you do not pay for a part you do not need.

Should I keep trying to restart it?

One restart and one 30-second power disconnect are reasonable, as the owner's manual lists. Repeated restarts will not help if a board is damaged, so schedule service instead.

Book a visit

Still seeing FA?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708
☎ Call our office ▤ Schedule a Technician