Error code · Range

Dacor Range Code C-A2: Cooling Motor Problem

Medium · inspection needed

Code: C-A2
Appliance: Range
Brand: Dacor
Warranty: 30-day workmanship

What C-A2 means

On Dacor DOP Transitional and Contemporary ranges, including the DOP48T960GS and DOP48C96DLS, and on the DOP30T940IS induction range, C-A2 means there is a problem with the cooling motor, so the cooling system needs to be checked. The cooling motor moves air through the range to keep the controls and the cabinet area from overheating. You see C-A2 on the display, and the oven may shut down early to protect itself.

Common causes of C-A2

The cooling fan motor
Blocked airflow around or inside the range
The wiring to the fan and the control

✓ One safe check you can try

1. Turn the oven off and let the range cool. 2. Make sure nothing is stacked against the range or blocking its vents. 3. Do not keep running long cycles with the code showing. 4. Let us know, and we will arrange a visit, because the owner's manual lists service as the next step.

! Why to stop there

A cooling code can come from the motor, from airflow or from the control, so we listen for the fan and test it before replacing anything.
If the fan runs but the code stays, the problem may be in the wiring or the control.
You approve a written price before work starts, and the workmanship is guaranteed for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F0Dacor Classic ERC Oven and Range Code F0: Shorted or Jammed Input Device F1Dacor Classic ERC Oven and Range Code F1: Watchdog Circuit Alarm C-23Dacor Range Code C-23: Probe Sensor Shorted F2Dacor Classic ERC Oven and Range Code F2: Runaway Oven Heat C-30Dacor DOP Range Code C-30: Board Sensor Open or Shorted F3Dacor Classic ERC Oven and Range Code F3: Shorted Oven Sensor C-31Dacor Transitional and Contemporary Range Code C-31: Board Too Hot F4Dacor Classic ERC Oven and Range Code F4: Open Oven Sensor Circuit

C-A2C-A2 questions

What does C-A2 mean?

The range reports a cooling motor problem. The fan that keeps the electronics and surroundings cool is not working as the control expects.

Is it safe to keep cooking with C-A2?

We advise stopping. Without proper cooling, heat can build up in the range, and the control may shut the oven down on its own.

Could C-A2 lead to C-21 or C-31?

It can. Poor cooling lets the range run hot, which may set the overheating codes, so we check the fan first.

Book a visit

Still seeing C-A2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708