Booking today · Houston · three-hour arrival windows Independent Dacor specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 231-9708 Schedule a Technician
Error code · Range

Dacor Induction Range Code C-F5: Display Link Interrupted

C-F5 appears only on the Dacor DOP30T940IS induction range. It means communication between the display and the secondary board was interrupted. In plain words, the screen you read and the board that runs the cooktop lost…

Medium · inspection needed
Schedule a Technician(713) 231-9708
Code
C-F5
Appliance
Range
Brand
Dacor
Warranty
30-day workmanship

What C-F5 means

C-F5 appears only on the Dacor DOP30T940IS induction range. It means communication between the display and the secondary board was interrupted. In plain words, the screen you read and the board that runs the cooktop lost their connection. You see C-F5 on the display, and the cooktop or oven functions may not respond until the link returns. Other Dacor ranges do not use this code.

Common causes of C-F5

  • The cable or connector between the display and the secondary board
  • The display panel
  • The secondary board
✓ One safe check you can try

1. Take the knob to Off and give the range a fresh start. 2. If C-F5 returns, switch off its breaker for at least 30 seconds and turn it back on. 3. If the code is still there, reach us to schedule service.

! Why to stop there
  • The break can be a connector, the display or the secondary board, and testing tells us which one before we replace a part.
  • If the display flickers or goes blank at times, tell us when you book.
  • Expect a written price ahead of the work and a 30-day warranty on our workmanship.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

C-31Dacor Transitional and Contemporary Range Code C-31: Board Too Hot F4Dacor Classic ERC Oven and Range Code F4: Open Oven Sensor Circuit C-70Dacor Steam Range Code C-70: Steam Sensor Reading F6Dacor Classic ERC Oven and Range Code F6: Control Memory Checksum Error C-72Dacor Steam Range Code C-72: Drain System Problem F7Dacor Classic ERC Oven and Range Code F7: Clean-Lock Circuit Alarm When Hot C-A2Dacor Range Code C-A2: Cooling Motor Problem F8Dacor Classic ERC Oven and Range Code F8: Door Lock Switch Not Responding
C-F5C-F5 questions
What does C-F5 mean on my Dacor induction range?

The display and the secondary board lost their communication link. The DOP30T940IS shows this code, while other Dacor ranges do not.

Is C-F5 the same as C-F2?

No. On this model, C-F2 concerns the touch control and the secondary board, while C-F5 concerns the display and that board.

Can I cook while C-F5 shows?

The range may not respond reliably. Switch it off and call us, so we can test the link before the cooktop is used again.

Book a visit

Still seeing C-F5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708
☎ Call our office ▤ Schedule a Technician