Booking today · Houston · three-hour arrival windows Independent Dacor specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 231-9708 Schedule a Technician
Error code · Range

Dacor Oven Door Lock Code C-d1: Lock Position

Code C-d1 tells you the door lock on a DOP48T960GS, a DOP48C96DLS or a DOP30T940IS induction range is not working properly or sits in the wrong position. The control expects the lock to be locked or…

Medium · inspection needed
Schedule a Technician(713) 231-9708
Code
C-d1
Appliance
Range
Brand
Dacor
Warranty
30-day workmanship

What C-d1 means

Code C-d1 tells you the door lock on a DOP48T960GS, a DOP48C96DLS or a DOP30T940IS induction range is not working properly or sits in the wrong position. The control expects the lock to be locked or unlocked at certain times and does not see that. You see C-d1 on the display, and the oven may not start a cycle that needs the door locked.

Common causes of C-d1

  • The door lock mechanism
  • The switch that reports the lock position
  • The control and wiring for the lock
✓ One safe check you can try

1. Set the knob to Off first, then try the range once more. 2. Check that the door is fully closed and nothing is caught in it. Do not force the latch. 3. If C-d1 returns, cut the breaker power to the range for at least 30 seconds and restore it. 4. If the code stays, contact us to book a technician visit.

! Why to stop there
  • The lock motor, the position switch and the control all take part, so we test them in order instead of guessing.
  • If the door is stuck shut, tell us when you book so we plan for it.
  • We hand you a written price up front, and we warrant our workmanship for 30 days.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

C-F5Dacor Induction Range Code C-F5: Display Link Interrupted C-F6Dacor Induction Range Code C-F6: Main and Sub Board Link Lost C-F7Dacor Induction Range Code C-F7: Oven and Cooktop Board Not Talking Door-not-shut error message (self-clean)Dacor Discovery Range Door-Not-Shut Message During Self-Clean: Door Open E2Dacor Heritage Induction Range Code E2: Cook Zone Too Hot F0Dacor Classic ERC Oven and Range Code F0: Shorted or Jammed Input Device F1Dacor Classic ERC Oven and Range Code F1: Watchdog Circuit Alarm C-23Dacor Range Code C-23: Probe Sensor Shorted
C-d1C-d1 questions
What is wrong when C-d1 shows?

The door lock is malfunctioning or sits in the wrong position. The control cannot confirm the lock state, so it posts the code and may block some cycles.

Can I open the oven door with C-d1 showing?

Often yes once the oven is off and cool, but do not force it. If the door will not move, wait and call us.

Will a restart clear C-d1?

Sometimes. If the lock is truly mispositioned, the code returns, and we test the lock.

Book a visit

Still seeing C-d1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708
☎ Call our office ▤ Schedule a Technician