HIPR30

Most common issues on this model

1. Induction zone that stops heating or shuts off in use
2. Bridge function that will not join two zones
3. Pause key or touch controls that do not respond
4. Cooling fan noise from the cooktop electronics

The Dacor HIPR30 is a 30-inch Heritage Induction Pro range with a 5.2 cubic foot oven. The cooktop has five induction zones, including a 9-inch center zone at 2,300 W, plus a bridge function that joins zones for large cookware and a Pause key. It needs a 240V, 50A circuit.

Induction ranges fail differently than gas or electric coil ranges. A zone that stops heating can come from the cookware, the power electronics, or heat protection, so we begin with magnetic cookware of the right size. A zone that stops heating can come from the cookware, the power electronics, or heat protection, so we begin with magnetic cookware. The bridge function and the touch controls depend on the control board. The cooling fan under the cooktop is another early check, since induction electronics shut down when they overheat.

The 50A connection deserves a look as well. We copy the model and serial from the data label. Our estimate is written before the work, and the repair has 30 days of workmanship coverage. If a part is scarce or the cost is out of proportion, we tell you before anything is ordered.

Key features

• Heritage Induction Pro line, 30 inches wide
• Oven of 5.2 cubic feet
• Five induction zones, including a 9-inch center zone at 2,300 W
• Bridge function and Pause key
• 240V, 50A supply