Error code · Wall Oven

Dacor Wall Oven Code C-F2: Touch Control Link Lost

Medium · inspection needed

Code: C-F2
Appliance: Wall Oven
Brand: Dacor
Warranty: 30-day workmanship

What C-F2 means

On a current Dacor wall oven such as the DOB30P977S, C-F2 tells you communication between the Main board and the Touch control was interrupted. The touch panel you press and the board that runs the oven are no longer talking to each other, so the oven shows C-F2 and may stop responding to the display. The owner's manual lists a restart first.

Common causes of C-F2

A loose or damaged connection to the touch control
A touch control that has stopped communicating
A Main board that is not answering the touch panel

✓ One safe check you can try

1. If the display responds, press OFF and try the oven once more. 2. If it does not respond, or C-F2 returns, turn the oven's breaker off for half a minute or more. 3. Switch the breaker back on. 4. If the touch panel stays dead, give us a call.

! Why to stop there

The display shows only that the link is lost, so we test the touch control, the Main board and the cable between them.
If the touch panel is damaged, the oven may be unusable until it is replaced.
The price is agreed in writing first, and our 30-day workmanship warranty covers what we repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

C-72Dacor Steam Oven Code C-72: Drain System Problem PRBDacor Millennia Wall Oven Code PRB: Probe Not Inserted Properly C-A2Dacor Wall Oven Code C-A2: Cooling Motor Trouble C-d0Dacor Wall Oven Code C-d0: Control Key Stuck C-d1Dacor Wall Oven Code C-d1: Door Lock Position C-F0Dacor Wall Oven Code C-F0: Main and Sub Boards Disconnected CLOSE OVEN DOORDacor Discovery Wall Oven Message "CLOSE OVEN DOOR": Door Ajar F0Dacor Older Wall Oven Code F0: Stuck Touch Pad

C-F2C-F2 questions

What causes code C-F2 on my Dacor oven?

The Main board and the Touch control are no longer communicating, so the oven shows C-F2 because it cannot exchange signals with the panel you use to set it.

Why will my oven not respond to the touch panel?

With C-F2 the panel and the main board are not talking, so presses may do nothing. The restart and power reset in the owner's manual are worth trying once before you call.

Do I need a new touch panel for C-F2?

Not always. The cause may be a connection or the Main board instead. We test the link first, so we replace only what actually needs it, and you see the price in writing.

Book a visit

Still seeing C-F2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708