Error code · Wall Oven

Dacor Older Wall Oven Code F1: Bake/Broil System Alarm

High · stop use, call now

Code: F1
Appliance: Wall Oven
Brand: Dacor
Warranty: 30-day workmanship

What F1 means

On older Dacor classic electronic range control wall ovens, such as the ECS130, MCS130S, PCD230 and MCD227 in the Epicure, Millennia and Preference lines, F1 is the System Watchdog Circuit alarm. The control's self-check found a failure in the bake and broil system. On Millennia models, it means a relay circuit failure. The oven beeps until you press CANCEL/SECURE. These older ovens are still in many Houston homes, and we repair them.

Common causes of F1

A relay on the control that is not switching correctly
Wiring or connections in the bake and broil circuit
A control board that needs replacing

✓ One safe check you can try

1. Silence the alarm with CANCEL/SECURE. 2. Leave the oven off, because it will not heat after this failure. 3. Keep the door closed and do not open any panels. 4. Call us to schedule a repair visit, and have the model number ready.

! Why to stop there

The code points to the bake and broil system as a whole, so we test the relays and wiring before we name a part.
Older control boards can be hard to find, so we confirm the part before you commit.
We quote the price in writing, and we tell you plainly when a repair is not worth it.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

C-d1Dacor Wall Oven Code C-d1: Door Lock Position C-F0Dacor Wall Oven Code C-F0: Main and Sub Boards Disconnected C-F2Dacor Wall Oven Code C-F2: Touch Control Link Lost CLOSE OVEN DOORDacor Discovery Wall Oven Message "CLOSE OVEN DOOR": Door Ajar F0Dacor Older Wall Oven Code F0: Stuck Touch Pad F2Dacor Older Wall Oven Code F2: Runaway Temperature Alarm F3Dacor Classic Wall Oven Code F3: Shorted Temperature Sensor F4Dacor Epicure, Millennia and Preference Oven Code F4: Open Sensor Circuit

F1F1 questions

What does F1 mean on my Dacor oven?

F1 is the System Watchdog Circuit alarm. The oven's self-check found a failure in the bake and broil system, and on Millennia models it means a relay circuit failure.

Can I clear F1 by pressing CANCEL/SECURE?

That stops the beeping, but it does not repair the oven. The owner's manual says the oven will not heat after this failure, so the cause still needs service.

Is it worth repairing an older oven with F1?

Often it is, if the relay or board can be found. We diagnose first, confirm parts, and give the written price before work. If it is not worth it, we say so plainly.

Book a visit

Still seeing F1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708