Booking today · Houston · three-hour arrival windows Independent Dacor specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 231-9708 Schedule a Technician
Common Problems · 2 min read

Dacor Column Refrigerator Not Cooling Like It Used To

A Dacor column refrigerator that warms slowly is often giving early notice. Here are five signs to watch, and what each one can and cannot tell you.

A column refrigerator that slowly loses its chill is rarely a sudden failure. It is more often a part wearing out over months. Here are five signs worth noticing early, and what each can and cannot tell you.

1. Milk Spoils Sooner Than Expected

A temperature creeping up a few degrees is easy to miss. Stand an appliance thermometer in a cup of water on the middle shelf, then read it the next morning. This shows whether the problem is real, but not which part is causing it.

2. Frost on the Back Wall

Frost where the cold air comes in can point to an airflow problem, a door that does not seal, or a defrost issue. We check each before suggesting a part.

3. Water Pooling Under the Crisper

A blocked defrost drain sends melt water into the cabinet. Sometimes a simple clearing helps, but a repeat blockage usually means something else is adding moisture.

4. A Compressor That Starts and Stops Often

Short cycles can come from a dirty condenser, a failing fan, or a control problem. We cannot name the part from the noise alone.

5. The Door Gasket Has Gone Soft

Pinch a strip of printer paper in the door at a few spots around the frame. If it slips free with no drag, the seal has gone soft. In older units, a worn gasket is common and often an easy repair.

What to Do Before We Arrive

Move perishables to another refrigerator if you can, clear the vents, and note the model label. On older Dacor columns we also check the condenser area for dust, since heat and Houston humidity make the unit work harder. If the cost of repair approaches the value of the unit, we say so. See the Dacor refrigerator repair page for what we service.

You can call us or fill out the form on this page to schedule a diagnostic visit.

Tell us the model and the code. We will bring the part.

(713) 231-9708 Schedule a Technician
☎ Call our office ▤ Schedule a Technician