Error code · Cooktop & Rangetop

Dacor DOP30T940IS Range Cooktop Code F8: Left Inverter Link Lost

High · stop use, call now

Code: F8
Appliance: Cooktop & Rangetop
Brand: Dacor
Warranty: 30-day workmanship

What F8 means

F8 on the Dacor DOP30T940IS induction range cooktop is a lost link. The induction main board can no longer talk to the left inverter board, and the exchange between them has been interrupted. The inverter board drives the left-side burners, so without that link those burners cannot heat. The cooktop shows F8 and the affected burners stay off until the link returns. Burners on the other side may still work normally.

Common causes of F8

Cable or connector between the boards loose
Power disturbance interrupting the link
The left inverter board
The induction main board

✓ One safe check you can try

1. Turn the cooktop off and back on. 2. If F8 returns, disconnect power at the circuit breaker for 30 seconds, then restore it. 3. If the code stays, stop using the cooktop and call for service. Please do not open the cooktop or handle its wiring yourself.

! Why to stop there

Whether the left inverter board, the main board or the cable between them is the problem
Whether the right side shows a similar code
Which board is needed, priced in writing before work

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop & Rangetop codes

C0Dacor Modernist Cooktop Code C0: Top Sensor Open C1Dacor Modernist Cooktop Code C1: Top Sensor Short C1 (range cooktop)Dacor DOP30T940IS Range Cooktop Code C1: Burner Running Too Hot C2Dacor Induction Cooktop Code C2: IGBT Sensor Problem d0Dacor Modernist Cooktop Code d0: Key Held Down E2Dacor Induction Cooktop Code E2: Element Overheated F0Dacor Modernist Cooktop Code F0: Control Boards Not Communicating F1Dacor Modernist Cooktop Code F1: Memory Chip Not Responding

F8F8 questions

Which burners does F8 affect?

F8 concerns the left inverter board, so the left-side burners are the ones that lose power. The right side has its own inverter board and its own code.

Is F8 the same as FA?

They are twins. F8 reports the left inverter link and FA reports the right one. If both show, we start at the main board, since both inverters talk through it.

Will you repair a DOP30T940IS?

Yes, and the age of the cooktop is not an obstacle. We identify the board that is giving trouble before we quote, and you approve the written price before we start.

Book a visit

Still seeing F8?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708