Error code · Range

Dacor Range Code C-21: Internal Temperature Too High

High · stop use, call now

Code: C-21
Appliance: Range
Brand: Dacor
Warranty: 30-day workmanship

What C-21 means

C-21 on a Dacor DOP Transitional or Contemporary range, including the DOP48T960GS, DOP48C96DLS and the DOP30T940IS induction range, means the internal temperature is unusually high and the range is overheating. The control is protecting itself and the cabinets around it. You see C-21 on the display, and the oven may shut down or refuse to start until things cool. We treat an overheating code seriously on every DOP range.

Common causes of C-21

A cooling fan or airflow problem inside the range
The temperature sensor reporting a false high reading
The oven control or the sensor wiring

✓ One safe check you can try

1. Turn the mode knob to Off and let the range cool completely. 2. Restart the range. On the DOP48C96DLS and DOP30T940IS, restarting is the owner's manual step; on the DOP48T960G, call for service. 3. If you smell gas at any time, leave the house and call the gas utility from outside. 4. If C-21 returns, call us or use the online form to schedule service.

! Why to stop there

We check whether the heat is real or the sensor is reporting it wrongly, because the two need different repairs.
If the range really overheated, we also look at the cooling and airflow before we price the repair.
You get a written price before work, with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

C-F2Dacor Range Code C-F2: Touch Control Link Lost C-F5Dacor Induction Range Code C-F5: Display Link Interrupted C-F6Dacor Induction Range Code C-F6: Main and Sub Board Link Lost C-F7Dacor Induction Range Code C-F7: Oven and Cooktop Board Not Talking Door-not-shut error message (self-clean)Dacor Discovery Range Door-Not-Shut Message During Self-Clean: Door Open E2Dacor Heritage Induction Range Code E2: Cook Zone Too Hot F0Dacor Classic ERC Oven and Range Code F0: Shorted or Jammed Input Device C-23Dacor Range Code C-23: Probe Sensor Shorted

C-21C-21 questions

Is C-21 dangerous?

It means the range thinks it is too hot, so treat it seriously. Turn the range off, let it cool, and do not use it again until the code stays away or we have checked it.

Can I restart my range after C-21?

On the DOP48C96DLS and DOP30T940IS, restarting the appliance is the owner step. If C-21 returns, stop using it and call us for an inspection.

Is a sensor problem possible with C-21?

Yes. A sensor can read too high even when the oven is fine. We test the sensor and the cooling system to see which case you have.

Book a visit

Still seeing C-21?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708