Error code · Dishwasher

Dacor EDW/IDW Dishwasher Code F-1: Inlet Valve Problem

F-1 on Dacor EDW and IDW 24-inch dishwashers from the older WPS platform points to the inlet valve. The control expects to sense conductivity in the sump after the tub fills, and when it does not,…

Medium · inspection needed

(713) 231-9708

Code: F-1
Appliance: Dishwasher
Brand: Dacor
Warranty: 30-day workmanship

What F-1 means

F-1 on Dacor EDW and IDW 24-inch dishwashers from the older WPS platform points to the inlet valve. The control expects to sense conductivity in the sump after the tub fills, and when it does not, it reads that no water came in and shows F-1. You may find the tub dry or barely wet and the cycle stopped. This is an older dishwasher that still serves many homes, and we repair it.

Common causes of F-1

Water supply valve closed or the home supply off
Fill line kinked or clogged
The inlet valve not opening
Wiring to the valve or the control

✓ One safe check you can try

1. Open the shutoff valve under the sink all the way. 2. Run the kitchen faucet to be sure water reaches the house plumbing. 3. Look along the fill hose for a kink or a crushed spot. 4. If F-1 returns, schedule service. Leave the dishwasher in its cabinet rather than pulling it out.

! Why to stop there

Whether water arrives at the valve and the valve opens
Whether the sump sensor misreads a full tub
Whether the valve for this older model can still be sourced

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F-9Dacor EDW/IDW Dishwasher Code F-9: WPS Sensor Problem HCDacor Modernist Dishwasher Code HC: Heating Check LCDacor Modernist Dishwasher Code LC: Leakage Check PCDacor Modernist Dishwasher Code PC: Zone Wash Check APDacor Modernist Dishwasher Code AP: Smart Phone Connection Mode F-2Dacor EDW/IDW Dishwasher Code F-2: Circulation Pump Problem F-3Dacor EDW/IDW Dishwasher Code F-3: Heater Not Warming Water F-4Dacor EDW/IDW Dishwasher Code F-4: Drain Pump Problem

F-1F-1 questions

What does F-1 mean on an older Dacor dishwasher?

The control did not detect water in the sump after the fill period, which is tied to the inlet valve. Either water is not entering or the valve is not opening.

Could the water supply be the problem?

Yes. A shut valve, a pinched hose or weak pressure in the house can stop the tub from filling. Those three are easy and safe for you to look at before we arrive.

Will you repair an older EDW or IDW?

Yes. We check which parts can still be sourced, quote in writing, and stand behind the work with a 30-day workmanship warranty. Call us or fill out the online form to schedule service.

Book a visit

Still seeing F-1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708