Error code · Range

Dacor Steam Range Code C-72: Drain System Problem

Code C-72 on a Dacor Contemporary dual-fuel steam range, such as the DOP48C96DLS, points to a problem with the drain system of the steam oven. The range could not drain the way it should, and you…

Medium · inspection needed

(713) 231-9708

Code: C-72
Appliance: Range
Brand: Dacor
Warranty: 30-day workmanship

What C-72 means

Code C-72 on a Dacor Contemporary dual-fuel steam range, such as the DOP48C96DLS, points to a problem with the drain system of the steam oven. The range could not drain the way it should, and you see C-72 on the display. Steam cooking may stop until the problem is cleared. Because this is a steam oven, water is involved, so we handle it carefully. We service these ranges and explain what we find before a repair.

Common causes of C-72

A blocked or restricted drain path
The drain pump or valve for the steam system
The control reading the drain circuit

✓ One safe check you can try

1. Start with the knob: set it to Off, then bring the range back on. 2. If C-72 returns, switch off the breaker for the range for 30 seconds or more and turn it back on. 3. Look for water on the floor near the range, and keep the area dry. 4. If the code stays, get in touch with us to arrange service.

! Why to stop there

A drain code can come from a restriction, a pump or valve, or the control, so we test the drain path first.
If water has collected in the oven, tell us when you book so we plan for it.
A written estimate comes first, and our labor is under warranty for 30 days after the visit.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

C-F0Dacor Range Code C-F0: Boards Stopped Communicating C-F2Dacor Range Code C-F2: Touch Control Link Lost C-F5Dacor Induction Range Code C-F5: Display Link Interrupted C-F6Dacor Induction Range Code C-F6: Main and Sub Board Link Lost C-F7Dacor Induction Range Code C-F7: Oven and Cooktop Board Not Talking Door-not-shut error message (self-clean)Dacor Discovery Range Door-Not-Shut Message During Self-Clean: Door Open E2Dacor Heritage Induction Range Code E2: Cook Zone Too Hot F0Dacor Classic ERC Oven and Range Code F0: Shorted or Jammed Input Device

C-72C-72 questions

What does C-72 mean on a Dacor steam range?

The range has a problem with its drain system. Steam cooking may stop, because the oven needs a working drain to run its steam cycle.

Should I keep using steam cooking after C-72?

We recommend not. If the drain cannot clear water, the problem can get worse. Switch to regular baking if the oven allows it, and call us.

Do I need to drain the oven by hand?

We do not advise guessing. Tell us what you see, and we handle the drain path during the visit.

Book a visit

Still seeing C-72?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 231-9708