DHD48U990W
Dacor DHD48U990W Chimney Hood Repair
Most common issues on this model
- Uneven capture over a wide cooking surface
- Filters that clog quickly
- Blower vibration
- Touch control
The DHD48U990W is a 48-inch chimney wall hood with a glass touch control and LED lights, drawing 120 volts at 15 amps. It is a current model. A hood this wide sits above a big range, and the stove below may have burners at either end that sit far from the center of the hood.
For that reason, uneven capture is the complaint we notice on wide hoods. If steam escapes at the edges, we compare the blower, the filters and the duct. A blower that vibrates points to a wheel or a mount, and it can set up a hum through the chimney. Filters that clog quickly need cleaning more often, and we show you how to remove them.
We read the exact model from the data label first. The price is quoted in writing, and the work is covered for 30 days.
Key features
- Chimney wall hood, 48 inches wide
- Glass touch control
- LED lights
- 120-volt, 15-amp supply
Why does the hood miss steam at the ends of my range?
A wide hood pulls best at the center. Weak or clogged filters or a blower running slowly make the ends worse. We check airflow, then suggest which speed to use for the burners at the edges.
What makes the blower vibrate?
An unbalanced wheel, a loose motor mount or a poor duct connection. We find which one by checking each, and we tighten or replace the part that is worn.
How often should I clean the filters?
It depends on how much you cook. If you notice grease on the filters or weaker draw, clean them. We show you how to remove them during the visit.
Book repair for your DHD48U990W
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.